DMP has released the 1158 wireless eight-zone input module. The 1158 allows installers to connect with existing hardwired zones to use them as 1100 Series wireless zones.
The module allows installers to convert up to eight existing hardwired zones (such as motion sensors, door and window contacts, etc.) into wireless zones.
The 1158 can replace up to eight zones from an old system when a DMP panel is installed in the same location as a non-DMP panel.
This means existing wiring does not have to be re-run, and existing contacts can be reused with the new system with no need to replace the current end of line resistors.
“This is a great new addition to the DMP wireless product line,” says Executive Marketing Director, Mark Hillenburg, “The 1158 allows dealers to save time and money on system upgrades. We hope this will be the new go-to product for many customers.”
The system can be programmed using Remote Link from the keypad or from the Tech app.
- 1100D Series Wireless Receiver Version 105 or higher
- 1100X Series Wireless Receiver Version 105 or higher
- XT30 Series panels
- XT50 Series panels with an integrated wireless receiver
- XR150/XR550 Series panels
- XTLplus panels
- XTLC panels with an integrated wireless receiver